H-300 Series: Energy Efficient Water Softener
Hellenbrand H-300 Water Softener
The Hellenbrand H-300 is ideal for reduced energy and water consumption. This kind of efficiency will help to extend the longevity of process equipment and heat exchanged systems, reducing the cost of maintenance over time. The H-300 Series has a number of benefits to homeowners saving them money for both electric and maintenance as well as bringing the home safe and clean water.
Product Details:
- Modular design
- Non-corrosive intervals
- Lead free brass valve
- One-piece stack assembly
- Piston operated
- Disassemble and reassemble in minutes
Design Options:
- Single
- Twin
- Tri-Plex
- Four-Plex
- Parallel, Alternating or Demand Recall Configurations.
Meter Accuracy
- 1.5” Meter 0.5 – 60 gpm
- 2” Meter 1.5 – 150 gpm
- Accuracy: ±5%
Features H-300 Series
- 3.0″ Inlet & Outlet provides higher service flows with less pressure drop
- 12-Volt Operation AC or DC
- 12-Volt Relay Driver allows multiple dry contact signals
- Several programming options including: variable reserve, fixed reserve, calendar day override, delayed or immediate regeneration.
- Diagnostics
- Days since last regeneration
- Gallons since last regeneration
- Gallon reserve capacity last 7 days
- 63 Days history of daily totals usage
- Maximum flow rate for the last seven days
- Total number of regenerations
- Total days in service
- Total gallons processed
Benefits H-300 Series
- Electronic Meter Demand with Calendar Day Override
- Scrolling User Screen shows capacity remaining, time of day and flow rate
- Service Interval Screen reminds you to call for preventative maintenance service
- Differential Pressure Switch Capability
- Nine Cycle Control
- Soft Water Brine Tank Refill
- Multiple Backwash and Rinse Capabilities
- Fully Programmable Cycle Position and Times
- Quiet Operation
- Variable Reserve automatically adjusts to changing water usage patterns.
- Permanent memory backup of all programming
- 2-1/2 years Time of Day Backup
- Uses less than $2 of electricity per year
More To Learn About This Water Softener
Brine Reclaim
Brine reclaim returns a portion of reusable brine to the brine tank. When it comes to this kind of efficiency, our units are superior to everything else on the market. The H300 standard electronic package is capable of reclaiming up to 30% of the salt used in regeneration for the next regeneration, where other brands will only return 20-25%. This means more money in your pocket. Salt savings will vary depending on the lbs. of salt per cubic foot of resin used to regenerate.
Water Reclaim
The H300 standard electronic package is capable of reclaiming much of the water used to regenerate the water softener and reuse that water to flush toilets. This water is typically soft and is free of the salt/brine discharge which is diverted to your standard drain/waste system. A holding tank is installed to reclaim this water, along with a repressurization and disinfection system. A separate line is required to refill this tank when the reclaim water drops below a certain level between regenerations.
Common Places for Usage
- Agriculture
- Apartment Buildings
- Boiler Water Treatment
- Car Washes
- Commercial Buildings
- Condominiums
- Dairies
- Factories
- Hospitals
- Homes
- Laundries
- Mobile Home Parks
- Motels and Hotels
- Nursing and Rest Homes
- Office Buildings
- Restaurants
- Schools
Don’t Just Take Our Word For It
Request a Quote
Ready to get started? Request information fast from one of our water conditioning specialists.
Our Service Locations
